In bulk-liquid logistics the expensive mistake is treating a claim of compliance as evidence of compliance. A sound flexitank assessment separates three documents: the UNECE CTU Code supplies the packing-safety framework, COA TG-07 allocates supply-chain responsibility, and PAS 1008:2016 defines performance and testing for a single-use bladder. With the global market at about USD 1.076 billion in 2026 and projected to reach USD 3.204 billion by 2034 at a 14.62% CAGR, the volume of cargo riding on those distinctions is growing fast.
Growing market, tighter scrutiny
Fortune Business Insights estimates put the flexitank market at USD 951.31 million in 2025, USD 1.076 billion in 2026 and USD 3.204 billion by 2034, a CAGR of 14.62%; Asia-Pacific accounted for about 39.25% in 2025. These are research-firm estimates and will differ by methodology. Source: Digital Market Reports, Flexitank Manufacturer Guide 2026. At the 140th Canton Fair in October 2026, buyers from food, beverage, edible oil and industrial chemicals pressed suppliers on safety, loading capacity, food-grade compatibility and reuse, evidence that flexitanks have moved beyond a niche market (Ocean Blue Whale, fair report).
What each framework actually covers
- UNECE CTU Code. A non-mandatory code for packing cargo transport units, developed jointly by IMO, ILO and UNECE. It addresses cargo compatibility, container preparation and dangerous goods in flexitanks, and states that dangerous goods must not be carried this way. It is a safety reference, not a product certification.
- COA TG-07. The Container Owners Association code of practice sets responsibilities across the flexitank supply chain and maintains the Flexitank Quality List (FQL) under its CQC scheme. A supplier name in a directory does not prove that the listed status covers your chosen design and production site.
- PAS 1008:2016. The specification for performance and testing of a single-use flexitank covers material properties, valve leak tightness, product information and rail-impact resistance, the latter defined by a 2g acceleration or retardation force. For intermodal movement this is the report worth requesting in full.
A material caveat is in order: most flexitank bladders are built from PE/PP multilayer film, not PVC coated fabric. What transfers to PVC composite buyers is the verification logic — batch traceability, weld and seal integrity, compatibility testing, container protection and leak response. The comparable PVC product forms are flexible water bladders, liners and secondary containment.
Two hard limits: fill and container
The COA Code requires the bladder to be filled to the manufacturer’s specified capacity with a tolerance of ±3% of nominal capacity, capped at 24,000 litres and 24,000 kg. The CTU Code adds that flexitank contents are subject to dynamic forces without significant retention from friction, which may cause damage or complete failure; payload should therefore be appropriately reduced and liquid mass agreed with the container operator (CargoLinked, Tank Containers and Flexitanks).
The container is part of the safety system: a 20 ft general-purpose unit rated to at least 30,480 kg gross mass, conforming to ISO 1496 Part 1 and carrying a valid CSC approval plate. Dents, sharp edges, floor gouges and protruding nails must be addressed, with protective lining where needed. COA members must hold all-risks liability insurance of at least USD 5 million — a membership requirement, not a warranty about your supplier, so ask for the certificate.
Six dimensions of supplier evaluation
- Quality systems and traceability: link raw material, film, valves, fittings, assembly and final inspection batch by batch.
- Cargo compatibility: density, viscosity, loading temperature, purity needs and regulatory class all affect suitability.
- Capacity and filling limits: nominal volume is not a loading instruction; convert against density, payload and carrier rules.
- Container suitability and installation: turn inspection, lining, restraint and fitting into a written work instruction.
- Mode and route: rail tests and carrier acceptance must match the specific configuration and lane, not a generic certificate.
- Technical support and lifecycle: installation guidance, discharge advice, incident escalation and used-bladder recovery all belong in the contract.
One manufacturer’s public range is 14,000–26,000 litres in a 20 ft container and up to 28,000 litres in a 40 ft unit, with butterfly or ball valves and references including CRCC, AAR, ISO 9001, ISO 14001, ISO 14067, FSSC 22000, FDA, EU 10/2011, KOSHER and HALAL. Notably, that supplier also warns that these are product ranges rather than universal loading limits and that the references are different kinds of approval with different scopes (LAF Technology, Flexitank Manufacturer Guide 2026). That restraint is a useful model for buyers.
FAQ
Does an ISO 9001 certificate prove a flexitank is acceptable?
No. ISO 9001 certifies a management system, not product-level pass results for materials, valve tightness or rail impact. Request PAS 1008:2016 test reports and check the model, production site and validity printed on them.
Can any cargo be loaded up to 24,000 litres?
No. 24,000 litres and 24,000 kg are COA ceilings. Actual loading depends on cargo density, container payload, carrier rules and manufacturer instructions, with filling tolerance at ±3% of nominal. Dense liquids often hit the weight limit before the volume limit.
Can dangerous goods be shipped in a flexitank?
No. The UNECE CTU Code states that dangerous goods must not be transported in flexitanks. If the cargo is classified as dangerous under applicable rules, use a packaging and transport solution approved for that cargo.
