Skip to content

Choosing Flame-Retardant PVC Duct Fabric: GB 8624 vs EN 13501-1

November 17, 2026 kezhibo Company News, News
Folded stack of blue PVC coated fabric ready for shipment

Selecting flame-retardant PVC-coated ventilation duct fabric means more than reading ‘B1’ on a datasheet. In China, GB 8624 sets the classes, but coal mines additionally require flame-retardant antistatic (FRAS) fabric to MT/T 165 and GB/T 20105. Older European projects still accept DIN 4102-B1, while high-end tunnels specify EN 13501-1 class B-s1,d0. Projects in the Americas and Middle East often demand NFPA 701. Get the standard wrong and you risk a failed inspection — or an ignition source and toxic smoke in a confined underground space.

Why flame performance is non-negotiable

Ventilation is central to safety in underground mines and long tunnels, including TBM drives. Flexible ducts deliver fresh air and remove dust and hazardous gases, often for long periods inside narrow, enclosed passages. Electrical sparks, residual heat from blasting and high equipment temperatures all provide ignition sources. If duct fabric catches fire it can generate toxic smoke rapidly and trigger a major incident. Flame rating is therefore a key metric in tendering, product acceptance and safety review.

Newstar Ventilation lists projects with strict requirements: the Sichuan–Tibet Railway and Dianzhong Water Diversion project in China, plus the Kure copper mine in Turkey and a Rio Tinto copper project in Mongolia. These are not paper clauses. In a long tunnel, evacuation distances dwarf those of a surface building.

Domestic classes: B1 is only the start

Under GB 8624, combustion performance falls into four classes — A, B1, B2 and B3. Flexible PVC-coated duct fabric mostly sits in B1 or B2:

  • Class A (A1, A2) is non-combustible and does not propagate flame, but these materials are typically inorganic board or metal: heavy, inflexible and impractical for a rollable suspended duct.
  • Class B1 is flame-retardant — self-extinguishing, slow flame spread and low smoke density — and is the mainstream choice for tunnels and mining in China.
  • Class B2 is combustible but retarded; under sustained open flame it still spreads and produces significant smoke. It is banned from underground mining and limited to temporary open-pit ventilation.
  • Class B3 is flammable with no retardancy and is prohibited in all underground work.

Here is the critical addition: in underground coal mining, B1 alone is insufficient. Duct fabric must be both flame-retardant and antistatic — FRAS — complying with MT/T 165 and GB/T 20105 for mining-grade coated fabrics, so that static charge cannot accumulate and spark a methane ignition. That is the essential difference between a coal face and an ordinary tunnel.

Overseas standards you will meet

DIN 4102 is the legacy German standard, with grades B1, B2 and B3. Although it is being superseded by EN 13501, many European and Central Asian mine and tunnel owners and supervisors still recognise DIN 4102-B1, so it regularly appears in export specifications.

EN 13501-1 is the current EU fire-classification standard for construction products: classes A2, B, C, D, E and F, supplemented by smoke production (s) and flaming droplets (d). High-end tunnels often specify B-s1,d0 — low flammability, low smoke, no flaming droplets. Droplets are especially dangerous in a tunnel fire because hot molten material can ignite nearby objects, which is why long tunnels and urban underground projects favour this class.

NFPA 701 is the US standard for flame resistance of textiles, covering flexible coated textile materials. Method 1 is the small-scale test, Method 2 the large-scale one; both assess flame spread and the risk of falling burning debris. It is frequently required for overseas mining projects in the Americas, Australia and the Middle East.

Writing a specification that can be accepted

  1. Fix the standard system from project location and the approving authority first, then work back to the formulation — do not pick fabric and hunt for a standard afterwards.
  2. Name the exact class and its attached smoke/droplet markers, for example ‘EN 13501-1 B-s1,d0’ rather than ‘class B’, and require a third-party classification report.
  3. List antistatic requirements separately with an upper surface-resistance limit and test method; for coal mining cite MT/T 165 and GB/T 20105 directly.
  4. Check the service temperature. A Rongshengyuan PVC-coated polyester duct is rated −20 to +80 °C, with 4–48 inch internal diameter, 20 m per roll, a steel-wire helix and an external wear strip. If the duty cycle exceeds that range, move to silicone- or neoprene-coated fibreglass.

One structural reminder: a flexible connector is there to absorb movement and reduce vibration transmission. It is not a duct support and not a fire stop. Letting duct weight rest on a short fabric section is the most common site misuse, and the real reason a replacement connector does not cure the noise.

FAQ

Can B1 duct fabric be used directly underground in a coal mine?

No. Coal mines require antistatic performance in addition to flame retardancy — FRAS fabric to MT/T 165 and GB/T 20105 — to prevent static accumulation igniting methane. B1 alone will not pass acceptance.

Which is stricter: DIN 4102-B1 or EN 13501-1 B-s1,d0?

EN 13501-1 is more granular, assessing smoke production and flaming droplets separately from flammability. B-s1,d0 requires low smoke and no flaming droplets, making it the safer choice for long tunnels and urban underground works, and generally the stricter specification.

What is the operating temperature range of PVC duct fabric?

Common PVC-coated polyester duct is rated −20 to +80 °C. For sustained higher temperatures or continuous hot airflow, use silicone- or neoprene-coated fibreglass instead of relying on a ‘flame-retardant’ label.

Sources: Newstar Ventilation guide to flame-retardant ratings for mining and tunnel duct fabric (https://www.newstarventilation.com/news/flame-retardant-duct-fabric-ratings-a-selecti-85676020.html); Rongshengyuan PVC-coated polyester tunnel ventilation duct product page (https://rsyhydraulichose.en.made-in-china.com/productimage/jayYGbtuaQUF-2f1j00OnrotRcyHYzD/China-Highly-Flexible-and-Flame-Retardant-Ventilation-Duct-for-Airport-Tunnel-and-Basement-Polyester-Fabric-Hose-Coated-with-PVC.html); Yeedah overview of industrial uses of PVC-coated fabric (https://www.yeedah.com/blogs-detail/8.html).

Related Products