Kezhibo Geomembrane 0 5mm 20mil Industrial Fabric Kezhibo Geomembrane 0.5mm (20mil) Industrial Fabric
Product Introduction
The Kezhibo Geomembrane 0.5mm (20mil) is a high-quality industrial fabric designed for reliable containment in pond and agricultural applications. Manufactured by Kezhibo New Materials, this geomembrane offers a balanced combination of flexibility and strength, making it an ideal choice for projects requiring a dependable barrier. With a thickness of 0.5mm (20mil), this industrial fabric meets the ASTM D7176 standard, ensuring consistent performance and quality.
Technical Parameters
- Model: Geomembrane 0.5mm (20mil)
- Thickness: 0.5mm (20mil)
- Standard: ASTM D7176
Parameter Analysis
The 0.5mm thickness provides adequate puncture resistance and durability for typical agricultural and pond lining uses, while remaining lightweight and easy to handle. The ASTM D7176 compliance indicates that the material has been tested for properties such as tensile strength, elongation, and tear resistance, ensuring it meets industry benchmarks. This industrial fabric is engineered to withstand environmental stressors, offering long-term service life in exposed conditions.
Application Scenarios
- Pond Lining: Creates an impermeable barrier for fish ponds, decorative ponds, and water storage reservoirs.
- Agricultural Lining: Suitable for irrigation canals, waste storage, and containment of agricultural liquids.
- Other Containment: Can be used for landfill caps, secondary containment, and similar applications where a reliable geomembrane is required.
Installation Guide
- Surface Preparation: Ensure the subgrade is smooth, free of sharp objects, and compacted.
- Unrolling: Lay the geomembrane flat, allowing for wrinkles to be smoothed out.
- Seaming: Use heat welding or adhesive bonding as recommended by the manufacturer. Overlap edges by at least 100mm for proper sealing.
- Anchoring: Secure the edges in anchor trenches to prevent movement.
- Inspection: Check all seams and surfaces for defects before backfilling or filling with water.
Usage Method
- Handling: Avoid dragging the material over rough surfaces to prevent damage.
- Placement: Position the geomembrane carefully, ensuring no tension or stress concentrations.
- Ballasting: In areas with high wind, use sandbags or soil to hold the material in place until final anchoring.
Maintenance Advice
- Regularly inspect for punctures, tears, or UV degradation.
- Keep the surface clean of debris that could cause abrasion.
- For long-term exposure, consider UV protection if not already included.
Repair Tips
- Clean the damaged area thoroughly.
- Cut a patch of the same material, larger than the damaged area.
- Use a heat gun or solvent-based adhesive to weld the patch, ensuring a watertight seal.
- Test the repair with a pressure test or visual inspection.
Procurement Advice
- Determine the required area and order with a 5-10% overlap allowance.
- Specify the thickness (0.5mm) and standard (ASTM D7176) when ordering.
- Request a sample to verify quality before bulk purchase.
- Consider the application environment (UV exposure, chemical contact) and consult with Kezhibo for material selection.
Packaging List
- Rolls of Kezhibo Geomembrane 0.5mm (20mil) – dimensions as per order.
- Installation manual (if applicable).
- Warranty certificate.
FAQ
Q1: What is the thickness of this geomembrane?
A1: The thickness is 0.5mm, which is equivalent to 20mil.
Q2: What standard does it comply with?
A2: It complies with ASTM D7176.
Q3: Can this industrial fabric be used for potable water ponds?
A3: This product is designed for general pond and agricultural use. For potable water, please consult with Kezhibo for specific certifications.
Q4: How do I join two pieces together?
A4: Use heat welding or approved adhesive, following the installation guide. Overlap edges by at least 100mm.
Q5: What is the maximum temperature it can withstand?
A5: Specific temperature limits are not provided in the spec data. For extreme temperatures, contact Kezhibo for guidance.
